Thrust Ball Bearings
Axial load only — screw-down, vertical shafts and turntable thrust plates.
- Series
- 51100 · 51200 · 51300
- Bore
- 10 – 340 mm
- Class
- P5 / P4
SINCE 2009 · BEARING MANUFACTURING
Precision in every revolution.
P5 / P4 accuracy class bearings from eight automated lines — Marposs in-process gauging, FANUC and Mitsubishi control. For machine-tool spindles, medical equipment and automotive drivetrains, shipped to 30+ countries.
- ACCURACY
- P5/P4
- LINES
- 08
- MARKETS
- 30+
NU 2210 E50 × 90 × 23 · P5
MOVE THE CURSOR — IT FOLLOWS
Since 2009
We keep your line
turning at tolerance.
A bearing is the cheapest part of the machine and the one that decides whether it runs. We build ours to the tolerance printed on the drawing, and we show the measurement that proves it.
HENERGY develops, manufactures and exports precision bearings. Our plant runs eight automated production lines and a metrology room with Marposs active gauging from Italy, plus FANUC and Mitsubishi control from Japan.
Dimensional and running accuracy corresponds to ISO class P5 and P4. On several series our parts drop in where imported equivalents were specified — same fits, same preload behaviour, at a lead time measured in weeks rather than quarters.
What we do
Three ways into the same plant
01
Bearings
Roller and ball bearings for radial, axial and combined loads — eleven families, one tolerance standard.
View products 02Engineering & quality
Made-to-drawing parts, tolerance-class verification and an inspection report with every batch.
View capability 03Export & supply
Neutral or branded packing, documents to your broker's format, tracked to door in 30+ countries.
Talk to usProduct range
Eleven families.
One tolerance standard.
Roller and ball bearings for radial, axial and combined loads — plus a workshop that builds to drawing when the catalogue stops.
Deep Groove Ball Bearings
The general-purpose workhorse for motors, pumps and gearbox shafts.
- Series
- 6000 · 6200 · 6300 · 6400
- Seals
- Open · ZZ · 2RS
- Class
- P6 / P5
Four-Row Tapered Roller Bearings
Rolling-mill duty: four tapered rows carrying extreme radial load with axial guidance in a single chock.
- Duty
- Mill · calender · press
- Rows
- 4
- Class
- P5 / P4
Double-Row Tapered Roller Bearings
Two opposed rows in one assembly — bidirectional axial capacity for pinion mounts and gear stands.
- Arrangement
- Back-to-back · face-to-face
- Rows
- 2
- Class
- P5
Tapered Roller Bearings
Single-row cones and cups for combined radial and axial loads — hubs, final drives, gearboxes.
- Series
- 30200 · 30300 · 32000
- Rows
- 1
- Class
- P5 / P4
Four-Row Cylindrical Roller Bearings
Backing-bearing class for roll necks — maximum radial capacity per chock width.
- Duty
- Roll neck · calendar
- Rows
- 4
- Class
- P5
Double-Row Cylindrical Roller Bearings
High stiffness in a compact bore — machine-tool spindles and pinion shafts.
- Design
- NN · NNU
- Rows
- 2
- Class
- P5 / P4
Cylindrical Roller Bearings
Line-contact rollers for heavy radial duty — NU, NJ and NUP designs with controlled shaft float.
- Design
- NU · NJ · N · NUP
- Rows
- 1
- Class
- P5 / P4
Four-Point Contact Ball Bearings
One ring, two contact points per ball — axial location in either direction at a narrow section height.
- Series
- QJ · QJF
- Contact
- 4-point · 35°
- Class
- P5
Angular Contact Ball Bearings
Shoulder-relieved raceways take combined load at speed — spindle pairs, screw supports, pumps.
- Series
- 7000 · 7200 · 7300
- Contact
- 15° · 25° · 40°
- Class
- P5 / P4
Non-Standard & Made to Drawing
Special bore, width, clearance, cage material or coating — manufactured to your print, from one piece to series.
- Input
- 2D print · 3D model · sample
- MOQ
- On application
- Lead
- 4 – 8 weeks
No family matches that. Send the designation and we will answer with a drawing.
Capability
Measured in microns,
not in promises.
Every line is closed-loop. Marposs active gauging reads the workpiece during grinding, the control compensates, and the next part starts from a corrected datum — which is how a P4 class stays a P4 class at volume.
08AUTOMATED LINES
Grinding, superfinishing, assembly and inspection in one flow.
P5/P4ACCURACY CLASS
Dimensional and running accuracy to ISO classes, batch verified.
0.8µmRUNOUT HELD
On P4 spindle series, measured on the finished part — not on a sample of the run.
30+EXPORT MARKETS
USA, Germany, Japan, Korea and beyond, full documentation.
Machining and quality control flow
IN-HOUSE · SIX STAGES- 01
Material control
- Chemical composition
- Metallographic analysis
- 02
Forging
- Precision forging
- Spheroidise annealing
- 03
Turning
- CNC machining
- Dimensional control
- 04
Heat treatment
- Quench and temper
- Hardness control
- 05
Grinding
- Precision grinding
- In-line measurement
- 06
Assembly & test
- Final assembly
- Full test
- MarpossItaly — in-process measurement
- FANUCJapan — CNC control
- MitsubishiJapan — drive & control
- ISO P5 / P4Tolerance class verification
From enquiry to container
TYPICAL 4 – 8 WEEKS- 01
Technical review
Drawing, load case and fit checked by an engineer; equivalent or modified design proposed.
- 02
Quotation
Unit price, tooling, lead time and inspection plan issued in writing, usually within 48 hours.
- 03
Production & inspection
Run on the assigned line, sampled for noise, clearance and a dimensional report before packing.
- 04
Export & dispatch
Neutral or branded packing, documents to your broker's format, shipment tracked to door.
Real parts
From the line,
not from a catalogue.
An enquiry can be answered with photographs of the batch it will come from — cage type, surface finish, marking and packing, shot on the bench before dispatch.
Every batch leaves with its own measurement file: bore, OD, width, runout and clearance, taken on the finished part. Ask for the report of the batch you are being quoted and we will send it with the price.
Request an inspection reportPartners & customers
Companies already
running our parts.
Machine-tool builders, automotive groups, packaging OEMs and research institutes — supplied directly or through their tier-one programmes.
FAST
SANTROLL01
SANTROLL01
QCMII02
SHAANXI
AUTO03
AUTO03
RENOWN04
CUBE05
CARRIER06
REGAL07
SIGNODE08
DIACOMT09
ZHIMA10
LI-LIANG11
ZYS12
ZXB13
HAAS
F1 TEAM14
F1 TEAM14
Your programme
could sit here.15
could sit here.15
Names shown to indicate supply relationships. Brand marks remain the property of their owners.
Contact
Send the part number.
We will send the answer.
A drawing, a competitor reference or a photo of the failed part is enough to start. Technical questions go straight to an engineer, not a mailbox.
PRODUCTION PLANT · NINGBO
Jack Xu
+86 155 3716 9955 [email protected]Dongqiao, Haishu District, Ningbo, Zhejiang, China
SALES OFFICE · GUANGZHOU
Jendy Wong
+86 136 7337 8927 [email protected]Tianhe District, Guangzhou, Guangdong, China
HENERGY · HENERGY BEARING
NINGBO · GUANGZHOU
P5 / P4 · 8 LINES · 30+ MARKETS